Python

Tiger MicroPython: program Tiger4, Tiger5 and TINY-Tiger 2 plus in Python, with the familiar Tiger drivers.

Tiger MicroPython

Python on Tiger boards.

A Python prompt over the serial interface, a file system for your programs and ready-made drivers for displays, interfaces, networking and storage.

The drivers carry the names you know from Tiger-BASIC, e.g. LCD1, CAN1, PWM1 or CNT1. Plus more than 200 Tiger functions for strings, math, bits and signals.

PythonTiger MicroPython · ANALOG01
import Tiger

analog01 = Tiger.ANALOG01()
# Read channel 0, 12-bit resolution
value = analog01.read(0, Tiger.ANALOG01_12BIT)
voltage = (value / 4095) * 5.0
print("AN00: {:.2f}V".format(voltage))

For Tiger4, Tiger5 and TINY-Tiger 2 plus.

FeatureTiger4TINY-Tiger 2 plus
Digital I/O5942
Analog inputs512
Hardware UARTs52
SPI, I2C, CAN bus1 bus each1 bus each
Ethernet10/100 Mbit/s on board (ETH2)external via SPI (W5500, ETH1)
USBFull Speed host–
SD cardmicroSD slot–
Memory8 MB SDRAM, 8 MB flash (file system), 8 MB flash (user data)8 MB SDRAM, 8 MB flash (file system), 8 MB flash (user data)
Supply3.3 V5 V (3.3 V available on the connector)

Values according to the Tiger MicroPython documentation. Technical data of the modules (datasheet): see product pages.

The Python firmware is installed at the factory: Tiger4 and TINY-Tiger 2 plus come with Python on the module, no separate download needed.

All technical data: Tiger4 Tiger5 TINY-Tiger 2 plus

Ready-made drivers for your hardware.

Display & input

Text and graphic LCDs (LCD1, QLCD, LCD6963), touch panel TP-1000 and PS/2 keyboard (MF2).

Analog & digital

Analog inputs (ANALOG01, ANALOG02), port I/O, encoders (ENC1), pulse counters (CNT1) and frequency measurement (FRE1).

Pulses & PWM

PWM outputs (PWM1, PWM2), pulse output (PO, PO2) and pulse measurement (PLS, PLS1IN).

Serial interfaces

Hardware and software UARTs (SER1B, SER2, SER4, SER5), SPI, I2C, 1-Wire and CAN bus (CAN1).

Networking & storage

Ethernet (ETH1, ETH2), plus USB and SD card on the Tiger4.

System

Timing functions, GPIO and interrupts, real-time clock (RTC1), timer (TIMERA), flash memory and FIFO.

Program and data protected.

Access password

A password protects the Python prompt. Only a verification value is stored, never the password itself.

Code protection

The whole program is encrypted and bound to the individual board. It cannot be read out and does not run on any other board.

Data encryption

Encrypt your own data with the board's key, e.g. in the SPI data flash. Altered data is detected.

Firmware updates

Only genuine update files are accepted. If the power fails during an update, the board completes it at the next power-on.

Python libraries.

Explorer

Manage files on USB sticks and SD cards: ls, cd, cat, cp and more, also as an interactive shell. Built in.

Telegram

Send and receive messages through a Telegram bot, e.g. to report a measured value or trigger an action remotely. Over Ethernet.

Looking for the Python documentation? Documentation

Want to learn Python step by step? Knowledge: BASIC / Python

Personal technical advice.

Direct technical support.

Wilke Technology GmbH +49 2405 408 55-0 info@wilke.de